Stereoscopic measurements and vectorization
This section contains the articles related to the stereoscopic instruments of Agisoft Metashape: visualization, measurements and manual vectorization.
Agisoft Metashape supports simple anaglyph display mode (for red&blue glasses) as well as hardware stereo mode that assumes polarization glasses and pro...
Fri, 17 May, 2024 at 3:36 PM
Shapes can be drawn over DEM or Orthomosaic as well as over model using instruments available on the Ortho/Model view toolbar. The Snapping tool in Metashap...
Fri, 26 Jul, 2024 at 4:38 PM
If you use the Stealth3DMouse controller, you may need to install a virtual COM port to enable this type of controller selection in the Metashape Navigation...
Thu, 17 Feb, 2022 at 2:25 PM
Metashape supports 3D controllers for navigation in Model view. In this article, we describe examples of how to set up a 3D Spacemouse controller. Below you...
Fri, 17 May, 2024 at 3:36 PM
Agisoft Metashape Professional edition supports vectorization tools in the Model and Ortho view modes. The following vectorization tools are available in Mo...
Fri, 17 May, 2024 at 3:37 PM